Electric rear wheel kits
PRICES for all types of sets:
– 1500W – 2500W Direct drive rear kit, Sinusoidal – 800 BGN;
– 3000W – 5000W Direct drive rear kit, Sinusoidal – 1900 BGN;
– 5000W – 8000W Direct drive rear kit, Sinusoidal – 2500 BGN;
– 500W rear gear kit – 650 BGN;
– 250W rear gear kit – 520 BGN;
– Installation of the above kits with a bicycle provided by you - 120 BGN.
REAR GEAR KITS 250W and 500W INCLUDE:
– Whale controllers are universal, support battery from 36V to 48V – 15AND. The rule is this: The consumption of the controller (amps) provides the acceleration, and the voltage ensures the speed (36V – up to 40 km/h; 48V - do 50 km/h). The power of the whale is amperes * tension;
– The control displays allow full setting of the parameters, support, power and give complete speed information, battery and mileage;
– The kits have brake sensors, which can be placed on the brakes quickly and easily. When the slightest movement of the brake lever is detected, they are applied, stop the gas supply.
– The bikes have brake disc mounting holes;
– The PAS function and the sensor provide support to varying degrees. The function can also be switched off and driven only on gas (like a motorbike);
– The drops in the sets are double reinforced (Double rim), with thick strong spokes 2.6mm. They are 1 "wide and have a rib for using a regular brake as well. A bandage for mounting under the inner tube is attached to the drops.
REAR DIRECT DRIVE KITS 1500W – 3000W INCLUDE:
– High quality BLDC motor 35A, braided on a 1.25" wide canopy (or Fat canopy for Fat bike kits 4" wide and rear distance 180mm), from 2.6 mm strong spokes;
– The salary is 16 " – 29" - at the customer's choice; for forks with a width of 135 mm (180 mm for Fat Bike);
– KT sinusoidal controller, 36-84V, 30-40A, with braking regeneration;
– The controller options are 36-48V - Universal, 60V or 72V;
– KT LCD3 control display or SW900 control display – optional;
– Gas handle, as in a motorcycle (twist throttle)
– Cassette with 7 screw or spline crown;
– 2 pcs brake sensors, mount on existing hydraulic or line brakes;
– PAS pedal assist sensor;
– 2 pc reinforced arms for mounting the frame (torque arm), which relieve the load on the frame;
– Full wiring
REAR DIRECT DRIVE KITS 4000W – 6000W INCLUDE:
– High quality BLDC motor 80A + – QS 205 50H V2 or V3, with maximum torque 190 n.m., braided on a 1.25" wide canopy (or Fat canopy for Fat bike kits 4" wide and rear distance 180mm), from 2.6 mm strong spokes; The cap is 16" – 29" - at the customer's choice; for forks with a width of about 150 mm (180 mm for Fat Bike);
– Sabvoton sinusoidal controller, 48-84V – Universal, 80A +, with braking regeneration;
– TFT750c display control display
– Gas handle, as in a motorcycle (twist throttle)
– Screw wreath cartridge
– 2 pcs brake sensors, are mounted on existing hydraulic or core brakes
– PAS sensor to assist pedal rotation
– 2 pc reinforced arms for mounting the frame (torque arm), which relieve the load on the frame (must be installed at high powers)
– Full wiring
FUNCTIONS:
– Sinusoidal controllers are the best choice. They are silent, with better power utilization and more economical (with greater efficiency);
They also support charging the battery when stopped. This preserves your mechanical brakes over time (they don't wear out).
Sabvoton and KT are two of the best quality brands on the market;
– The rule is this: The consumption of the controller (amps) provides the acceleration, and the voltage ensures the speed (48V – up to 55 km/h; 60V - up to 70 km/h; 72V - do 85 km/h);
The power of the whale is amperes * tension;
– The control displays allow full setting of the parameters, support, power and give complete speed information, battery and mileage;
– The kits have brake sensors, which can be applied to any brakes quickly and easily.
When the slightest movement of the brake lever is detected, they are applied, stop the gas supply, the electric brake is applied and the battery starts charging when stopped.
– The bikes have brake disc mounting holes;
– The PAS function and the sensor provide support to varying degrees. The function can also be switched off and driven only on gas (like a motorbike);
– The drops in the sets are double reinforced (Double rim), with thick strong spokes 2.6mm. They are 1.25 "wide for better fit of the tire inside and durability.
Fat Bike drops are 4 "wide as standard. A bandage for mounting under the inner tube is attached to the drops.
RECOMMENDATIONS FOR CHOOSING A BIKE:
– For 2000 - 3000W rear whales – rear fork distance – 135 mm; (can also be stretched a little if necessary)
– For 4000 - 6000W rear whales – fork width (rear fork distance) – approx 150 mm;
– For Fat Bike whale – fork width (rear fork distance) – approx 180 mm;
– For the rear whales, it is recommended that the bike has commands for 7 the gum at the back (less or more is also not a problem)
– It is recommended that the bike has disc brakes for better braking.
Reviews
There are no reviews yet.