2With BMS 8.4V 20A, protective board with balanced charge

Share the product

2With BMS 8.4V 20A, protective board with balanced charge

Price – 10BGN. per item including VAT

 

Battery Management System 2S BMS (Battery management system) 20A 8.4V Series Balanced Charge Protection Board
WIRING DIAGRAM:
Connect 0V first, then 4.2V and finally 8.4V, in the exact written sequence. When soldering to the board,
do not touch any other components on the board and do not make a deliberate short circuit.
Connect the load and discharge to the marked ones + and -. Check the battery output for proper connection + and – to the category and to the category.
It is recommended to use copper wires with more than 2 square millimeters.

SPECIFICATION:
Charging voltage: DC 8.4V;
Continuous discharge current: 20A maximum (if the heat dissipation environment is not good, please, reduce the load);
Continuous charging current: maximum 10A;
Application: For lithium batteries with rated voltage 3,7 V and charging from 4,2 V per cell (incl 18650, 26650 and polymer lithium batteries)
can release 25A current, power less than 50 W electric drill or 168 W resistive commodity
Product size: 48mm x 20mm x 4mm / 1.88 x 0.78 x 0.15 inch.
Weight: 3g

 

 

Weight 0.02 kg
Dimensions 4.8 × 2 × 0.4 cm

Reviews

There are no reviews yet.

Be the first to review “2With BMS 8.4V 20A, protective board with balanced charge”

Your email address will not be published. Required fields are marked *

Order

2With BMS 8.4V 20A, protective board with balanced charge